User`s manual

Rastergraf
1-24 General Information
1.7 Configuration Information
The basic graphics board includes:
• Rastergraf Borealis Graphics Processor with 8, 16, or 32 bit/pixel
• 16 MB SGRAM
• hardware interrupts, pan, scroll, and zoom and cursors
• analog video outputs
• Quad Image BIOS supports VGA, FCode, DVI, and Sync on Green
(SOG)
An on-board 3.3V regulator can be provided on the PMC and PCI boards
for systems which do not supply 3.3V to the backplane. CPCI backplanes
always have 3.3V. Please contact Rastergraf for more information about
this and other special configurations.
Table 1-6 Eclipse3 Software
Operating
System
Rastergraf
Software
Version
OpenGL and/or
DirectX
DVI,
SOG
BIOS
Solaris 2.6 - 10 DDX 3.0 no yes FCode
Solaris 2.6 - 10 GLDX 1.0 OpenGL n/a FCode
Linux Xfree86 4.2 OpenGL yes VGA
VxWorks SDL 3.x no yes VGA
LynxOS SDL 3.x no yes VGA
Linux SDL 3.x no yes VGA
Windows 2K, XP 2K, XP 5.x OpenGL, DirectX yes VGA
Table 1-7 Common Eclipse3 Configurations
Bus Type
32 MB
Option
DVI
Option
Rear I/O
Option
3U/6U
Option
Local 3.3V
Option
Semi-rugged
Option
PMC, PCI /32MB /DVI n/a n/a /V See Table 1-3
CPCI /32MB /DVI /RIO /3U or /6U n/a See Table 1-3
Note: Please contact Rastergraf for complete Model number
information.