USB Serial Converter (Micro USB B type) 2014.02 Rev. 1.
Contents 1.Introduction ................................................................ 2 1-1. Overview ............................................................................... 1-2. Package Contents ................................................................. 1-3. System Requirements and Restrictions .............................. 1-4. RS-232C connector Pin Assignment .................................... 2 2 2 3 2.Installation and Operation on Android OS ....... 4 2-1.
1.Introduction 1-1. Overview ● REX-USB60MB is a USB to serial converter. Compatible with Universal Serial Bus specifications Rev. 1.1. ● Up to 230.4Kbps data transfer rate. ●Micro USB (B type Male) Easy to connect Android tablet or smart phone. ●Power/Transmit/Receive LED indicators for monitoring communication status. 1-2.
1-4. RS-232C connector Pin Assignment The pin assignment of the connector is below: This DB9pin connector is compatible with ANSI/EIA/TIA-574 specifications. 12345 6789 D-Sub9pin Male Pin# 1 2 3 4 5 6 7 8 9 Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI Anchor [#4-40] For using inch screw Direction DTE – DCE.
2. Installation and Operation on Android OS Please make sure that the Android tablet meets the following specifications: • USB port is Micro-USB B or AB • Android OS version is 3.2, 4.0 or later • USB Host mode is available 2-1. Installation of USB60Term application Download the terminal application “USB60Term” from Google Play. 1) Start Google Play. Type “USB60” to the search box on Google Play. 2) Select “USB60Term” from the search result, and install it.
2-2. How to operate USB60Term When the USB60Term starts, the below window will show: 1 5 2 6 7 3 8 9 4 1 2 3 4 5 6 7 8 9 Display the status of detecting USB Serial Status of detecting USB Converter, this status shows “Connected” or “Not Serial Converter connected”. The button for changing serial parameter. After changing the parameter values, tap the “To setting” button “Configure” button to enable new values. After tapping this field, enter the send data. Send data field Display the received data.
How to send data When tapping the send data field, the software keyboard shows up. Then, enter the send data. You can set multiple lines with a new-line. After entering the send data, tap the “Send” button or the “Send with CR+LF” button at the upper-right of screen. Then, the send data will be transmitted. How to receive data The data from USB Serial Converter will be always received. And the received data will show at the “receive data field”.
How to change serial parameter After tapping the “To setting” button, you can change serial parameter values. When edit is ready, the “To setting” button will be changed to the “Configure” button. And the back-ground color of serial parameter values will be changed in light blue. Baud Rate Stop Bit Data Bit Parity Flow Control After finishing editing the parameter values, tap the “Configure” button for changing values.
3. Specifications Product Name Serial Input/Output level USB Specification Connector Number of I/O ports Unit Dimensions Cable Length Weight Data transfer mode Data transfer Rate (Baud) Transmit Distance Power Voltage Power Consumption Serial Parameter RS-232C connector LED Indicators Operating Environment Storage Environment REX-USB60MB RS-232C level USB(Universal Serial Bus) Specifications Rev. 1.1 USB :Micro-USB B male RS-232C:D-Sub9 male (with anchor [#4-40]) 1 port 3.35[L] x 1.1[W] x 0.
9