Installation guide

31
© 2003 directed electronics, inc.
button two Channel 2
button three Remote Start
+ buttons one and two Timer mode
+ button one and three Short-Run/Turbo
3.
TTrraannssmmiitt
. While holding the Program
switch, press the button on the transmitter
that you would like to control the selected
receiver channel.
4.
RReelleeaassee
. Once the code is learned, the
Program switch can be released.
CHANNEL NUMBER FUNCTION
1 Auto-Learn
2 Lock/Unlock
3 Channel 2 output
4 Remote Start
5 Turbo/Short Run
6 Timer Mode
7 Delete all Transmitters