Installation guide

43
© 2003 directed electronics, inc.
keys in the ignition. The user must also have the neutral safety
feature of the vehicle periodically checked, wherein the vehicle
must not remotely start while the car is in gear. This testing
should be performed by an authorized Directed Electronics, Inc.
dealer in accordance with the Safety Check outlined in the
product installation guide. If the vehicle starts in gear, cease
remote start operation immediately and consult with the autho-
rized Directed Electronics, Inc.dealer to fix the problem.
n After the remote start module has been installed, contact
your authorized dealer to have him or her test the remote start
module by performing the Safety Check outlined in the product
installation guide. If the vehicle starts when performing the
Neutral Safety Shutdown Circuit test, the remote start unit has
not been properly installed. The remote start module must be
removed or the installer must properly reinstall the remote start
system so that the vehicle does not start in gear. All installations
must be performed by an authorized Directed Electronics dealer.
OPERATION OF THE REMOTE START MODULE IF
THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS
INTENDED MODE OF OPERATION. OPERATING THE
REMOTE START SYSTEM UNDER THESE CONDI-
TIONS MAY RESULT IN PROPERTY DAMAGE OR
PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE
THE USE OF THE UNIT AND SEEK THE ASSISTANCE
OF AN AUTHORIZED DIRECTED ELECTRONICS, INC.
DEALER TO REPAIR OR DISCONNECT THE
INSTALLED REMOTE START MODULE. DIRECTED