Instructions / Assembly

Using the Dry Storage Compartment

IMPORTANT: Roll the top edge of the dry bag over a couple times

before fastening the buckles. This compartment will stay reasonably

dry under normal circumstances. However, please note that water

may leak into this storage bag if the kayak is tipped upside down or

is left out in strong rain. Do not store valuable articles in this bag if

they must stay dry.

Deflating and Storing your Kayak

IMPORTANT: Let the kayak dry completely before deflating and

storing.

Step 1

Remove the backrest from kayak by

unzipping it at the bottom and unclip

support straps from rings.

Step 2

Lay the kayak face up on a flat surface.

Make sure there are no sharp objects under

the product which might puncture the

tarpaulin cover or vinyl. Remove the Boston

valve in the back and allow it to completely

deflate.

Step 3:

Fold the kayak into thirds as shown and role

kayak starting at the front, working your way towards the valve in the

back. Completely remove the valve to let any remaining air escape.