Installation Guide

Note also that the air pressure in the tube will fluctuate depending on air and
water temperatures. Adjust the air pressure in the tube accordingly throughout
the day to maintain proper firmness during use. Fully inflated tubes left in the sun
for long periods of time can expand and become over inflated causing damage to
the tube.
Step 4
Attach the tow rope (not included).
Important: Loop end of rope MUST pass through hole of
the quick-connect prior to wrapping loop around hooks.
Inspect condition of molded tow point prior to each use.
Do not use if it shows signs of damage, cracking or
breaking.
To Deflate:
• Unscrew entire valve body from base.
• Clear valves used in the smaller air compartments may be deflated by pinching
the base of the valve or inserting a deflating straw into the hole and the air will
escape.
Towing Recommendations
For best performance and stability in bumps and turns:
STAY CENTERED ON THE TUBE. Let the tube do the work in sharp turns and over
bumps. Keeping your weight centered will also allow for level flights and landings
if you hit big bumps.
For best performance and stability in turns:
• When pulling one rider, the rider should always be positioned in the center
of the tube. Do not stand.
• When pulling two riders, they should be position towards the outside
position and rider weights should be as equally balanced as possible. Do not
stand.
• When pulling three riders, balance the weight of the outer two riders as
equally as possible, placing the odd weight rider (lighter or heavier) in the
center position. Do not stand.
11