Owner's manual

How to Connect the Aqua

Beam to Activity Island

Step 1

Before inflating the Aqua Beam, lay the inflatable on a flat

surface. Make sure there is no sharp object under the

product that might puncture the material.

Step 2

Locate the valve and start inflating. See inflation and valve

operations on page 8. Inflate tube until it is firm like a

basketball.

Step 3

There are two straps that connect the Aqua Beam to the

Activity Island. Two extra straps are provided should you

want to connect the Aqua Beam between two Activity Islands.

Float the Aqua Beam up to one side of the Activity Island.

Orient the Aqua Beam so the anchoring ring is farthest away

from the Island.

Feed the end of one strap through the ring on the bottom

side of the Beam and through the corresponding ring on the

bottom side of the Island.

Step 4

Feed strap through the middle opening of the buckle and

then feed it through the bottom opening.