User manual

27
9. Connecting the inputs
The subwoofer is equipped with loudspeaker inputs and RCA inputs to connect the car radio.
If your car radio has RCA outputs, the subwoofer should always be connected via the RCA inputs to ensure high-
quality sound.
If your car radio is not equipped with RCA outputs, you can connect the subwoofer to the loudspeaker outputs without
using additional devices or adapters.
Never use both input types (i.e. loudspeaker input and RCA input) at the same time.
For the connection of the RCA inputs, only use suitable shielded RCA cables. The use of other
cables might cause interferences.
Keep the length of the RCA cables as short as possible.
Do not install the RCA cables close to other cables. This way, you avoid interferences in the
subwoofer input.
To avoid distortions or mismatches that could damage the subwoofer, the RCA inputs must
only be connected to source devices equipped with RCA outputs and the loudspeaker inputs
must only be connected to loudspeaker outputs. Also note the information under
„Specifications“.
a) Connection via RCA inputs
• Connect the RCA outputs of your car radio to the LINE INPUT connection (9) of the subwoofer.
Left RCA output of car radio > LINE INPUT L
Right RCA output of car radio > LINE INPUT R
b) Connection via loudspeaker inputs
• Insert the provided loudspeaker adapter lines into the HIGH POWER INPUT connection (10) of the subwoofer.
• Connect the loudspeaker outputs of you car radio to the line ends of the adapter:
CH1+ line > left positive loudspeaker output
CH1- line > left negative loudspeaker output
CH2+ line > right positive loudspeaker output
CH2- line > right negative loudspeaker output