User manual

+12V

FUSE

SPEAKER FRONT

LEFT RIGHT

SPEAKER REAR

GND

REM

POWER

INPUT

BRIDGED

020738

e24

• Connect the +12 V connection of the power terminal (14) directly to the positive terminal of the car battery.

• Connect the REM connection of the power terminal (14) to the remote control connection or the aerial control

output of the car radio.



The amplifier will be switched on via this input if a voltage of +12 V is supplied.

Nowadays, most car radios are provided with such a control output which only carries +12V if the radio

is switched on.

• Connect the GND connection of the power terminal (14) to the negative terminal (earth) of the battery or to the

car body.

Caution! As the electrical conductivity is limited due to the increased use of gluing technology

or coated metal parts, not every metal component is suited to function as an earthing point.



Distribute the power supply in a star-shaped way, i.e. the connections of the negative lines start from

one point for all components of the car hi-fi system. This way of distributing the power supply avoids

earth loops.

Connect the positive lines in the same way.