User manual

32
HPF
HPF
HPF LPF FULL
HPF LPF FULL
FULL HPF
FULL HPF
80H
80H
80H
80H
50H
50H
Min
Min
Min
Min
2K
2K
2K
2K
250H
250H
Max
Max
Max
Max
LPF
LPF
REAR
REAR
IN
IN
OUT
OUT
IN
IN
12
12
6
SUPER
SUPER
BASS
BASS
0
Gain
Gain
Gain
Gain
L
R
HPF
HPF
POWER
POWER
PROTECTION
PROTECTION
FRONT
FRONT
9. Connecting the amplifier inputs
The amplifier is equipped with 6 RCA inputs to be connected to the car radio.
Car radios with RCA outputs can be directly connected to the input sockets. If your car radio is only equipped with
loudspeaker outputs, a suitable audio frequency adapter is to be used for the connection.
For the connection of the RCA inputs, only use suitable shielded RCA cables. The use of other
cables might cause interferences.
Keep the length of the RCA cables as short as possible.
Do not install the RCA cables close to other cables. This way, you can avoid interferences in
the amplifier input.
To avoid distortions or mismatches that could damage the amplifier, the RCA inputs must only
be connected to source devices equipped with RCA outputs. Also note the information under
„Specifications“.
• Connect the RCA outputs of you car radio to the RCA inputs of the amplifier.
Rear outputs > REAR IN connection (6)
L = left input
R = right input
Front outputs > FRONT IN connection (8)
L = left input
R = right input
• If your car radio does not have 4 RCA outputs, please use a Y adapter.