Product Overview The Ravelli APLT4 Lightweight tripod is great for photographers that are looking for a lightweight and versatile 61" tripod. This tripod has the ability to position your camera from a normal landscape orientation to a portrait orientation. You are sure to be able to capture the photo you want with this tripod.
Identifying the parts
Using the Tripod Initial Set Up To begin using the tripod, open the carrying bag using the zipper and pull the tripod out of the protective plastic bag. Height Adjustment After you have removed the contents, start by loosening the Leg spreader knob (J), then spread the legs apart. Retighten the leg spreader lock after it reaches the bottom of the center column. Adjusting the height of the APLT4 is done by extending each leg.
The Quick Release Plate To remove the quick release plate, First unlatch the quick release lever which will release the plate. To attach the camera to the quick release plate, hold camera securely in one hand and locate the 1/4” screw on the bottom. Secure the screw of the quick release plate onto the camera by turning it clockwise. To install the quick release plate insert the front of the plate end first, then snap in the back. The lock will snap close when the plate is seated.
Care & Maintenance Clean tripod with a clean damp cloth. Specifications Model: APLT4 Model Tripod Max Load: Supports Up To 10 LBS Panning Angle: 360° Tilt Angle: 180°, 90° Upward or 90° Downward Dimensions: Storage Height: 24” Maximum Height: 61.5” Minimum Height: 23” Tripod: 2.14 LBS Shipping Weight: 3.
Caution: There is a tipping risk for the fully extended tripods. This can be due to moving the tripods while fully extended, things such as uneven surfaces or wind. To reduce the risk of tipping over, we recommend placing one tripod leg facing the same direction as the camera or the heavy part of mounted equipment to balance the weight. We also recommend purchasing sand bags or weights to set on the tripod legs to hold the tripod in place.
