User Manual

Prodigy™ Owners Manual 99301XXX
10
INSTALLATION
11. Install headboard brackets to the
bed base frame per the following
instructions:
a. Raise the head section of the bed
(with hand control) to gain access to
the bed base frame.
b. Slide one headboard bracket channel
onto one side of the bed base frame.
Using (2) carriage bolts/nuts (FIGURE
6) attach channel to base frame
(FIGURE 7). Hand tighten bolts/
nuts (loosely) to allow adjustment
of the headboard bracket channels.
Repeat procedure to install the other
headboard bracket channel to the
other side.
HEADBOARD BRACKET
HARDWARE KIT CONTAINS:
(4) 3 INCH CARRIAGE BOLTS - A
(4) 1 INCH HEX HEAD BOLTS - B
(8) NUTS - C
A
C
B
FIGURE 6: Headboard bracket hardware.
FIGURE 7: Headboard bracket channel installation (one each
side of the head section of the bed).
FIGURE 8: Headboard bracket flange installation (attach one
flange to each of the headboard bracket channels).
QUEEN SIZE HEADBOARD BRACKET
ASSEMBLIES ARE SHOWN. TWIN SIZE
HEADBOARD BRACKETS (OR SMALLER)
ARE NOT EQUIPPED WITH ANGLE BRACE
(FIGURES 7 AND 8).
NOTE
USE (2) 3 INCH CARRIAGE BOLTS AND
NUTS TO ATTACH EACH BRACKET
CHANNEL TO BED BASE FRAME
EXTENSION
ANGLE
BRACE
ANGLE
BRACE
SLIDE HEADBOARD
BRACKET CHANNEL
OVER THE BED BASE
FRAME EXTENSION
c. Attach one headboard bracket flange
to one of the bracket channels with
(2) hex head bolts/nuts (FIGURE 8).
Tighten bolts. Repeat procedure to
attach the other headboard bracket
flange.
USE (2) 1 INCH HEX HEAD
BOLTS AND NUTS (TIGHTEN)
TO ATTACH HEADBOARD
BRACKET FLANGE TO EACH
BRACKET CHANNEL