User Manual

Prodigy™ Owners Manual 99301XXX
11
d. Slide headboard bracket assemblies
(in or out) to achieve a distance of
1.5 inches (38.1mm) to 2 inches
(50.8mm) between the edge of the
bed base and headboard bracket
flange assemblies (FIGURE 9).
e. Firmly tighten the 3 inch carriage
bolts of both headboard bracket
channels.
f. Measure the distance (center-to-
center) between the mounting holes
in the headboard.
g. Measure the center-to-center
distance between the mounting slots
of the headboard bracket flanges
(FIGURE 10).
h. If bracket flange adjustment is
required to accept the headboard,
remove the
1 inch
headboard
bracket flange
bolts and move
flanges
side-to-side
for the
adjustment
(FIGURE 10).
Reinstall bolts
and tighten.
i. Install
headboard.
12. Install mattress on
the adjustable bed
base.
Typical Prodigy™
adjustable bed
installation is now
complete.
1.5 TO 2 INCHES
SLIDE BRACKET
ASSEMBLIES IN OR
OUT TO ACHIEVE
POSITION
FIGURE 9: Headboard bracket position from the edge of the
bed base frame.
INSTALLATION
REMOVE 1 INCH BOLTS AND RELOCATE FLANGES TO
ACHIEVE CENTER-TO-CENTER DISTANCE REQUIRED
FOR HEADBOARD MOUNTING HOLES
MEASURE FLANGE SLOTS
CENTER-TO-CENTER TO
CHECK HEADBOARD HOLE
LOCATION
FIGURE 10: Headboard bracket measurement and adjustment to accept headboard.