User Manual

Prodigy™ Owners Manual 99301XXX
12
FOOT UP/DOWN BUTTON
Press and hold to raise or lower the
foot section.
ALARM BUTTON
Press to turn alarm on or off. Press
once for Wave wake-up and twice
for Alarm wake-up. Press three times
for both features. Press a fourth time
to deactivate alarm. Alarm status is
indicated on the clock display.
ALARM SET BUTTON
Press to activate alarm set mode. Press the
hour (head up/down) and minute (foot up/
down) buttons to set time. To exit mode,
press any other button on the hand control.
WAVE ON/OFF BUTTON
Press and hold the increase arrow—
after the head and/or foot massage
have been activated—to activate the
wave vibration system. To turn wave
vibration system off, press and hold
the decrease arrow until the wave
turns off.
HEAD UP/DOWN BUTTON
Press and hold to raise or lower the
head section.
HEAD MASSAGE BUTTON
Press and hold the increase arrow
to turn the massage on at medium
intensity. Adjust massage intensity
using increase and decrease arrows.
To turn off, press and hold the
decrease arrow until the massage
turns off.
LEVEL BUTTON
Press to return the bed to the flat
position.
POSITION BUTTONS
Press and release to return the bed to
one of the four positions programmed
using the S button.
DISPLAY
Indicates current time when no features
are being activated. When sleep timer
is set, displays time remaining in cycle.
Prodigy™ HAND CONTROL FUNCTION
NOTE
haNd cONTrOl rEquirEs fOur (4) aaa sizE baTTEriEs. TO cONsErvE
baTTEry lifE, ThE TraNsmiTTEr TurNs Off all fuNcTiONs whEN
aNy buTTON is prEssEd fOr mOrE ThaN 50 sEcONds.
FOOT MASSAGE BUTTON
Press and hold the increase arrow
to turn the massage on at medium
intensity. Adjust massage intensity
using increase and decrease arrows.
To turn off, press and hold the decrease
arrow until the massage turns off.
SET BUTTON
Press to capture any position or
function (massage or wave) of the bed
as a programmed position. To program,
press the S button. When the display
shows Set, within 2 seconds press the
1, 2, 3, or 4 button to save the current
setting. when programmed, position 1
is the default sleep position and postion
3 is the default anti-snore position.Up
to four positions may be saved.
TIME SET BUTTON
Press to active time set mode. Press the
hour (head up/down) and minute (foot up/
down) buttons to set time. To exit mode,
press any other button on the hand control.
ADDITIONAL BUTTON FUNCTIONS
1. Sleep timer — Press the S button two (2) times to program the Sleep timer for 30 minutes
or three (3) times for 60 minutes. After the allotted time, the bed will return to program set
position 1.
2. Anti-Snore — Press Set button 3 to activate the anti-snore feature. The bed will go to
position 3 and after 30 minutes, the bed will return to position 1. Note: the bed has a
default position 3 setting of head up seven (7) degrees, which can be re-programmed by
the user.