Operator`s manual

Chapter 5
22 SmartBoom and SmartRow Installation and Operation Manual
Note: A maximum of eight no spray zones can be created for a job. The Start No Spray Zone
screen will automatically advance to the next zone number after each no spray zone has
been ended.
End No Spray Zone Screen
The End No Spra 1 screen will automatically display after you have pressed the key on the Start
No Spra 1 screen.
The End No Spray Zone screen allows you to mark the end of the no spray zone or cancel the
operation. Press to complete the recording of the no spray zone. The display will blink “End.” Use
the or key to toggle between “End” and “Cancel.” Press the key again to apply your
selection.
Note: If you do not come back to the starting point before you end a no spray zone, SmartBoom/
SmartRow will close the no spray zone by generating a line from the starting point to the
machine’s current location. The area inside this boundary will become a no spray zone.
End No Spra 1
Cancel or End
RAVEN
HOME
INDUSTRIES