Operator`s manual

Chapter 8
50 SmartBoom and SmartRow Installation and Operation Manual
On Look Ahead Screen
To get to the On Look Ahead screen, press from the Controller Config screen.
Press to edit the On Look Ahead setting. The number will begin blinking to indicate you are in edit
mode. Use the or key to increase or decrease the value displayed. Use to move
between digits. Press the key again to finish editing.
Note: If you select No in the Cntrl All Sctns screen and step through the individual Cntrl screens,
you will automatically come to the On Look Ahead screen when you press from the
last Cntrl sctns screen.
Off Look Ahead Screen
To get to the Off Look Ahead screen press from the On Look Ahead screen.
On Look Ahead
2.1 Sec
RAVEN
HOME
INDUSTRIES
Off Look Ahead
1.8 Sec
RAVEN
HOME
INDUSTRIES