User's Manual

RV-M50-EC Technical Manual
8
ATTE
Read product temperature – Read the internal temperature
of the unit’s circuit board in degrees Celsius.
-40 to +99
-
ATVB
Read DC input Voltage– Returns the DC input voltage
reading, in mV (12500 = 12.5VDC input).
None
None
ATVR
Firmware Version – Returns firmware version currently
loaded on the module.
Read Only, 3 characters
none
AT&F
Restore Factory – Restore to the factory configuration
None
PING
Ping another modem. Format is PING xxxx, where xxxx is
the ID of the modem to ping.
XXXX
-
SHOW
Show/display an overview of the radio’s configuration.
None
-
MODE
L
Read Model number. Read the model number.
None
-
BAND
Show/display the radio band. Displays the frequency band
that the radio is configured for, along with the upper and lower
frequency, in MHz. BB is the band code, lll is the lower
frequency in MHz, and uuu is the upper frequency in MHz.
None
BB, lll, uuu
CONFIG
Show Configuration. Display the settings of every parameter
in the unit. If the parameter is 1, then the help text is not
displayed, If the parameter is 2, the configuration is output in
strictly the format used to program another unit.
None, 1, 2
-
AESKEY
Set the AES encryption key
2.5 GPS Commands
The following commands are available if the GPS option is installed.