Technical Manual
Company Confidential 6 Raveon Technologies Corp.
2. Overview
The M6 RF radio modem module is capable of high-speed narrow-band data
communications and is compatible with Raveon’s M7 and M6 series Radio
Modems. Its powerful microprocessor enables it to perform as both a data
radio modem and a paging receiver. It contains a receiver, a transmitter, and
modem, creating an easy-to-use transparent data radio link. The M6’s user
interface is asynchronous digital data into and out of the M6. Modem
operation is virtually transparent to the user and the configuration of the
modem is via the user serial port. The M6 module may be put in Raveon’s
Tech Series enclosures with a myriad of various I/O interface options.
The command-line interface is similar to Raveon’s other data radio products,
and configuring the mode is very easy. The M6 also has a digital input pin
that may be used to electrically change modem types between data modem
and paging modes.
The M6 is an easy to use and its re-programmability makes it extremely
versatile. Most parameters within the modem may be re-configured to
optimize it for specialized operations, extended range, or higher data
throughput.
2.1. Features
General Features
Serial input and output. Programmable serial baud rates up to 115.2kbps.
Very small sized and single-board construction.
Very efficient circuitry. ( < 700mW receiving, < 8W transmitting)
Lowest current draw in industry.
Easy to use. Transmit data in = Receive data out.
Receive-only version available
Easily configured using “AT” commands
Extensive diagnostic capabilities
Serial communication may are 8 bit ASCII, or WMX
Data Radio Modem Features
High-speed over the air data rates.
Built-in radio transceiver with integrated modem
Wide input voltage with high-efficiency switching voltage regulator.
Capable of store-and-forward repeating operation.
16 bit addressing for up to 65,525 different unique device addresses per channel
Supports group and broadcast transmissions. Network mask allows groups of any size.
Up to 2 watts of RF output. Other RF power levels available upon request.
Very fast Transmit-to-Receive turn-around time.
Serial input and output. Programmable serial baud rates up to 115.2kbps.
Programmable over-the-air data rates for long-range or high-speed