User's Manual

Company Confidential 17 Raveon Technologies
The second command above sets the Repeat Source to 1000 and the Repeat
Destination to 1000, both with a Mask of FFFF. The FFFF mask means all
digits of the source and destination are used to determine if the transmission
should be repeated. All packets from units with MYID 1000 (A)sent 1000
will be repeated by this unit. In other words, all transmissions from A will be
repeated by B.
To view the Repeater Table, use the ATX command, with no parameter. To
view a single entry in the table, use the ATXn, where n=1, 2, 3, or 4.
To delete an entry in the table so it has no effect on the operation, set the
fields to 0. For example, to disable make entry 1, use the ATX1 0 0 0 0
command.