User's Manual

Company Confidential 9 Raveon Technologies
2 Overview
The M7-UC data radio is a rugged high-performance, high-speed narrow-
band data modem. It contains a receiver, a transmitter, and modem, creating
an easy-to-use transparent data radio link. The M7-UC’s user interface is
asynchronous RS-232 data into and out of the M7-UC (CMOS level optional).
Modem operation is virtually transparent to the user and the configuration of
the modem is via the user serial port.
Unlike any other radio modem on the market, the M7-UC may be operated in
either a “Packetized Mode” or a “Streaming Real-Time Mode”. There are
advantages to each approach, and your choice depends upon how your
system operates.
For privacy and network versatility, the M7-UC incorporates a 16 bit
identification code. Its protocol also uses a 16bit CRC to guarantee the
integrity of the data. Perfect for SCADA and telemetry applications, the
M7-UC can be used for simple point-to-point data communication
applications, or for more sophisticated point-to-multipoint, peer-to-peer, or
mesh networks.
Although the M7-UC is the easiest to use modem on the market, its re-
programmability makes it extremely versatile. Most parameters within the
modem may be re-configured to optimize it for specialized operations,
extended range, or higher data throughput.
2.1 Features
 High-speed over the air data rates , 4800bps in 6.25Khz, or 9600bps in 12.5kHz.
 Built-in radio transceiver with integrated modem
 Easy to use. Plug-in, Turn-on, and GO. Transmit data in = Receive data out.
 Lowest current draw in industry.
 Wide input voltage with high-efficiency switching voltage regulator.
 Integrated Packet data protocol and built-in Streaming Real-Time operation.
 ARQ error correction and retransmission capability. Totally transparent to the application.
 Capable of store-and-forward repeating operation.
 Small sized and very rugged extruded enclosure.
 16 bit addressing for up to 65,525 different unique device addresses per channel
 Supports group and broadcast transmissions. Network mask allows groups of any size.
 5 watts of RF output. Other RF power levels available upon request.
 Easily configured using “AT” commands
 Very fast Transmit-to-Receive turn around time.
 RS-232 serial input and output. Programmable serial baud rates up to 57600.
 Programmable over-the-air data rates for long-range or high-speed
 Automatic key of transmitter on data.
 RF carrier-detect is not required receiving. No squelch setting required.