User's Manual

Using the FireLine Modem – Streaming Mode
This section describes the operation of the Streaming Mode of operation.
This mode is selected with the command ATMT 2.
4.7. Streaming Mode Operation
In Streaming Mode, radio transmissions will begin whenever data enters the
mode, and the transmission will continue as long as there is data to send.
The transmitter will automatically key when data enters the modem, and there
is no need to assert any control lines. It will automatically de-key when there
is no more data to send.
Figure 3 illustrates the difference between the Packet Mode and the
Streaming Mode of operation.
` Figure 3 (Streaming Mode of Operation)
For operation of the modem in the Packetized Mode, see the section on page
12 entitled Using the FireLine Modem – Packet Mode.
4.8. Baud Rate Selection
In Streaming Mode, the user data may still enter the modem at any baud rate,
as set with the ATBD x command. The FireLine modem will buffer the data