Product data

M7 GX Technical Manual 11 Raveon Technologies Corp.
RV-M7 GX GPS Modes of Operation
The GPX x command is used to configure the RV-M7 GX for various common configurations. The following table lists the parameters internal to the
RV-M7 GX that are configured and saved when the GPS x command is executed. After the command is executed, individual parameters may be
modified to customize the operation of the unit.
Parameter GPS mode Output Message Format NMEA Position GGA, GSV, RMC Position/status report rate Data communication via RS232 also Capable of Speed triggered position reports Speed Trigger default Minimum Distance Trigger Digital Input Triggers Serial Port Baud Rate Can be a repeater
Command
used to modify
this parameter
GPS x OUTPUT x NMEAOUT x TXRATE xx DATAMUTE x TRIGSPEED xx TRIGDX xx TRIGBITS xx ATBD X Repeat X Default = 0(off)
Transponder
1
Nothing
No (0) 10
TX only
(1)
Yes 0
(off)
0
(off) 0 (off) 4800 NO
RavTrack PC
2
$PRAVE
( x=1 )
Yes (1) 10
TX & RX
(0)
Yes 0
(off)
0
(off) 0 (off) 38400 Yes
Radar
3
$GPTLL
( x=2 )
Yes (1) 10
TX & RX
(0)
Yes 0
(off)
0
(off) 0 (off) 38400 Yes
GPS Display
4
$GPWPL
( x=3 )
No (0) 10
RX only
(1)
Yes 0
(off)
0
(off) 0 (off) 4800 Yes
-LX receive only, no
GPS in the unit.
5
$PRAVE
( x=1 )
No(0) 10
RX
(1)
No
N/A
*
1
N/A N/A 38400 Yes
.