User's Guide
Table Of Contents
- CONTENTS
- Package Contents
- Features
- Operation Guide
- LED Indicators
- Configure the Travel Router
- 1. On Mobile App
- 2. On Webpage (10.10.10.254)
- Q: How do I restore my RAVPower Filehub to factory
- Q: How do I update the firmware?
- Q: The “RAV Filehub” app cannot find the USB stora
- Q: My Filehub is unresponsive when I enter the adm
- Q: My mobile cannot connect to the FileHub after c
- Q: The network speed decreases in the Bridge Mode.
- Q: My device can’t connect to the Internet via the
- FCC STATEMENT :
43 / 44
Use FileHub as a Power Bank
Use FileHub as a power bank to charge your mobile device by
simply connecting it to your devices via the USB charging cable.
Check the remaining battery level by pressing the Power Button.
Specifications
Model
RP-WD009
Input
DC 5V / 2A
Wi-Fi Speed
733Mbps (300Mbps@2.4GHZ;
433Mbps@5GHz)
Standards
IEEE 802.11b/g/n
Frequency Band
2.4GHz / 5GHz
Battery Capacity
6700 mAh Li-ion
Play Time
2.4G: 8.4 hours
5G: 6 hours
Temperature & Humidity
Operating: 5°C-40°C (41°F-104°F) /
5%-90% RH (Non-condensing)
Storage: 0°C-60°C (32°F-140°F) /
5%-90% RH (Non-condensing)
Dimensions
113 x 76 x 25mm / 4.4 x 3.0 x1.0in
Weight
199.4g / 7.0oz
FAQ
Q: How do I restore my RAVPower Filehub to factory settings?
1.
Make sure it’s connected to a mobile device or laptop via the USB cable.
2.
Press and hold the Reset Button for 10 seconds with a needle or a
toothpick.
3.
Wait for the routerto reboot.
4.
Or you can find the Restore to factory default setting in the router
admin system (10.10.10.254)by Settings -> System -> Reset Settings.
Q: How do I update the firmware?
1.
Power on the Filehub, connect to its local Wi-Fi network.Log in on the
10.10.10.254webpage.
2.
Connect a USB storage device to the Filehub. Put the firmware file in
your cellphone or laptop which accessing to 10.10.10.254 instead of the
USB storage.
3.
Go to Settings -> System -> Firmware Upgrade -> Select firmware from
your cellphone or laptop -> Save -> wait to finish and reboot.
Q: The “RAVFilehub” app cannotfind the USB storage deviceafter I
plugged it into the product.
1.
Unplug to power off the Filehub.
2.
Unplug the USB disk and plug it into the Filehub again.
3.
Plug to power on your Filehub again with the USB storage plugged in.
4.
You can also accessthe file of your USB drivevia the routeradmin
system on 10.10.10.254.
Q: My Filehub is unresponsive when I enter the admin webpage
10.10.10.254.
Make sureyou deviceis connected to the router.It may disconnectfrom
the router when you are changing settings without your notice. Make
sure it stays connected with the Filehub.