Instruction manual

12
Storing Ray:
Store the Ray Projector in a place where the temperature is always
between -20º and 45º C (-4º to 113º F).
Caution:
Do not leave Ray in the car, since interior temperatures in parked vehicles
may exceed the desired range.
When using iPod or charging the battery, it is normal for the Ray to get
warm. The exterior of the Ray functions as a cooling surface, transferring
heat from inside the unit to the cooler air outside.
Cleaning Ray:
To clean Ray, unplug all cables and turn Ray off, making certain the power
switch is in the OFF position. Use a soft, slightly damp, lint-free cloth to
avoid getting moisture in the openings.
Caution:
Do not use window or household cleaners, aerosol sprays, solvents,
alcohol, ammonia, or abrasives to clean Ray.
Cleaning the Lens:
Ray’s lens is recessed in order to avoid the accumulation of dust, or other
particles. Dust can be removed from the lens using a dry air canister and
gently blowing the on the lens. Finger prints and/or other contamination
such as liquid spills on the lens should be cleaned by a knowledgeable
camera technician.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including
interference that may cause undesired operation.