SR-OCFF SPEED RING USER MANUAL
INTRODUCTION Thank you for choosing Raya. The Raya SR-OCFF Speed Ring is designed exclusively to mount the Raya OC-OSB80 32˝ or Impact FFOSB60 24˝ Octa Softboxes to the Raya SDR-400 Alpha Monolight. It offers easy setup and takedown with quick attachment to your SDR-400’s S-Mount, so you can create soft, diffuse lighting on location or in the studio. PRECAUTIONS ⚠ ⚡ • Please read and follow these instructions and keep this manual in a safe place. • Do not attempt to disassemble or repair this product.
OVERVIEW 2 1 Speed Ring: Also Included: 1. Rod sockets 2.
INSTRUCTIONS MOUNTING YOUR OCTA SOFTBOX TO THE SPEED RING 1. 4 Open and unfold your softbox, and fit the speed ring inside the center hole. Make sure the speed ring’s rod sockets are on the same side as the pebbled, reflective interior of your softbox and are aligned with your softbox’s rod pockets. 2. Insert the plain black end of one of your softbox’s flex rods into one of the speed ring’s rod sockets. 3. Fit the silver-tipped end of the flex rod into the corresponding rod pocket of your softbox.
4. Insert the next rod into the rod socket on the opposite side of the speed ring, and then fit it into your softbox’s rod pocket. 5. Attach the next two flex rods at a 90° angle from where the first two rods were inserted. 6. Attach the remaining flex rods according to the instructions above, making sure to insert one rod and then the next on the opposite side of the speed ring. 7.
MOUNTING THE SPEED RING ASSEMBLY Before mounting the speed ring assembly to your Raya SDR-400 Alpha Monolight, make sure that your monolight is turned off and unplugged from its power source and that it’s securely mounted to a light stand. To mount the speed ring assembly, follow these steps: 6 1. Align the three mounting pegs on the speed ring with the corresponding notches in your SDR-400’s S-mount. 2.
BREAKING DOWN THE SPEED RING ASSEMBLY Dismantle the speed ring assembly by following the mounting instructions above in reverse order. As with the mounting process, make sure that your monolight is turned off and unplugged from its power source before you start. To break down the assembly, follow these steps: you installed them: start with two rods on opposite sides of the speed ring, then the next two at a 90° angle to the first pair, and so on until all the rods are removed. 1.
ONE-YEAR LIMITED WARRANTY This RAYA product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
