Datasheet

All of the above information, including illustrations, is believed to be reliable. Users, however, should
independently evaluate the suitability of each product for their application. Raychem makes no warranties
as to the accuracy or completeness of the information and disclaims any liability regarding its use.
Raychem’s only obligations are those in the Standard Terms and Conditions of Sale for this product and in
no case will Raychem be liable for any incidental, indirect or consequential damages arising from the sale,
resale, use or misuse of the product. Raychem Specifications are subject to change without notice. In
addition Raychem reserves the right to make changes in materials or processing, without notification to the
Buyer, which do not affect compliance with any applicable specification.
Printed in UK WC 93400 10/94
Raychem, Raybraid, Tinel-Lock and SolderSleeve are trademarks of Raychem Corporation.
Ordering information
Part number Diameter Tinned Copper Wire
of former
(mm) No. of No. of ends Individual strand Minimum Cable bundle tolerance
carriers per carrier size (AWG/mm) coverage % Max. (mm) Min. (mm)
Ray 90 -3.0 3.0 ± 0.13 16 5 36/0.13 90 3.5 2.0
-4.0 4.0 ± 0.25 16 7 36/0.13 90 5.0 3.0
-5.0 5.0 ± 0.25 24 6 36/0.13 90 6.0 4.0
-6.0 6.0 ± 0.25 24 7 36/0.13 90 7.0 5.0
-10.0 10.0 ± 0.25 24 9 34/0.16 90 12.0 7.0
-12.5 12.5 ± 0.25 24 10 34/0.16 90 13.0 11.0
-15.0 15.0 ± 0.38 24 11 32/0.20 90 18.0 13.0
-20.0 20.0 ± 0.38 36 7 30/0.25 90 23.0 17.0
-25.0 25.0 ± 0.38 36 9 30/0.25 90 28.0 22.0
-30.0 30.0 ± 0.38 36 9 28/0.32 90 36.0 27.0
Ray 10X -3.0 3.0 ± 0.13 16 10 38/0.10 93 5.0 2.5
-4.0 4.0 ± 0.25 24 7 36/0.13 93 7.5 3.5
-6.0 6.0 ± 0.25 24 9 36/0.13 93 9.5 4.5
-7.5 7.5 ± 0.25 24 14 36/0.13 93 14.0 7.0
-10.0 10.0 ± 0.25 36 12 36/0.13 93 22.0 8.0
-12.5 12.5 ± 0.25 36 15 36/0.13 93 24.0 11.0
-20.0 20.0 ± 0.38 48 16 36/0.13 93 38.0 16.0
The X in the part number shall be replaced with the plating type.
ie. Ray 101 = Tin plated copper
Ray 103 = Nickel plated copper
Ray 90 = Tin plated copper only
Plastic former Tinned copper braid
• Screening for military
harnesses
• Easy removal from former
• 90% minimum optical coverage
• Ray 101 and Ray 103 super
flexible with high expansion
ratios
RayBraid
Tubular braiding for the
electrical screening of
wire bundles
To ease the assembly of hand built
harnesses, Raychem manufacture a
range of braids for the electrical
screening of wire bundles. Raybraid
is supplied on a tube former which
facilitates assembly and is more robust
than braid supplied in flattened form.
Ray 90
Minimum 90% optical coverage
available in 10 different sizes from 3.0
to 30.0 mm supplied diameter.
Ray 101 and Ray 103 (super flexible)
Minimum 93% maximum 100% optical
coverage possess high usable
expansion ratio (minimum 2:1).
Available in a wide range of sizes to
cover 2.5 to 38.0 mm diameters.
Standard Ray 90 is offered in tinned
copper but alternative finishes are
available. Ray 101 is tinned copper,
Ray 103 is nickel plated copper for high
temperature applications.
Ray 101 and Ray 103 are also fully
compatible with Tinel Lock adaptors for
termination of the braid to associated
connectors.
For further information consult the
integrated harness systems guide.
Raychem also supplies a range of
SolderSleeve connectors suitable for
braid terminations.