User's Manual

 Handle Assembly Type 1

 Handle Assembly Type 2

(4) Before Exposure

Be sure to check the equipment daily and confirm that it works

properly.

Sudden heating of the room in cold areas will cause

condensation to form on the instrument. In this case, wait until

condensation disappears before performing exposure.

 Room temp. 70℉ / 21℃ is recommended.

If the instrument is used with condensation formed on it,

problems may occur in the quality of the instrument. When an air-

conditioner is going to be used, be sure to raise/lower the

temperature gradually so that a difference in temperature in the

Insert the handle in

the same direction

If the

handle is

not locked,

the detector can be

dropped.

Please confirm lever position. When the

handle is locked, the lever should be

same position with the right picture.