User's Manual

R-USM-503

8. Radio Frequency compliance

(1) FCC Notice (U.S.A)

 Test standards

- 47CFR Part 15.107 (b) / 47CFR Part 15.109 (g) Class A.

- FCC Part 15 C Section 15.247

- FCC Part 15 C Section 15.407

 FCC ID: QIIRY1417WGB

5.15- 5.25 GHz band is restricted to indoor operations only.

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed

down through the MAC, through the digital and analog baseband, and

finally to the RF chip. Several special packets are initiated by the MAC.

These are the only ways the digital baseband portion will turn on the RF

transmitter, which it then turns off at the end of the packet. Therefore,

the transmitter will be on only while one of the aforementioned packets

is being transmitted. In other words, this device automatically

discontinues transmission in case of either absence of information to

transmit or operational failure.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.