User's Manual
27
It is the filter function that limits the connectable device.
i. DHCP Static Settings
• Automatic Allocation OFF: Display the setting value of automatic IP allocation for devices.
• Non-management device: Display the policy about the registered or unregistered devices to the
WEB UI.
• HW address: Input the 12-digit Hardware address of device to where the IP is assigned.
• IP address to allocate: Input the assigned IP address.
ii. Mac Searching
• HW Address: Input the 12-digit Hardware address directly into the field or using the automatic
search function.
• Table for Device management
• The table shows the hardware address of the devices that the DHCP Static table manages and
the record list of the IP address to be assigned.