User's Manual

mn100 Digital Display

2.5 Chapter and Page Operation

Instrument information is displayed in a “Chapter and Page” format

using the

button to scroll through the Chapters and the

and buttons to move between Pages. The diagram below

shows the information format.

Chapters and Pages

Installation

5.3 Bracket Mounting (Preferred Method)

This method allows for the easy removal of an instrument as and

when required, for either security reasons or to prevent damage or

discomfort whilst not in use.

1. Using the three supplied M4 bolts attach the back plate to

the rear of the instrument (Fig.1).

2. Drill three 2mm holes marked “BRACKET” on the Template

and using the supplied self tapping screws, attach the clip

bracket to the mounting surface (Fig.2).

3. Place the instrument flat against the bracket slightly

higher than the final position and slide gently down into

position. There will be a small click as the bracket secures

the instrument into position (Fig.3).

4. To release the instrument press lightly on the bracket tab

and slide the instrument upwards (Fig.4).