User's Manual

Remote Display
10
www.tacktick.com
Depth Deep Alarm
The water depth has increased above or fallen below the
preset alarm level. The depth value that triggers the alarm is
affected by any keel or waterline offsets that have been
added. See page 21 s5 to set the alarm function.
Wind High Alarm
The wind speed has increased beyond the preset alarm
level. See page 22 S6 to set the alarm function.
This alarm does not sound as the wind speed decreases
below the preset alarm level.
Cross Track Error Large Alarm
A large cross track error has been alerted by the GPS.
See page 22 S7 to set the alarm function.
Waypoint Arrival Alarm
A waypoint arrival signal has been received from the GPS.
The waypoint name is shown on the top line of the display.
See page 22 S8 to set the alarm function.
2.8 Information Display - Data Item Descriptions
1 SPEED
The vessel's actual speed through the water as measured by
the Speed Transducer, displayed in the currently selected
speed units. See page 22 S9 to set units.
2 SPEED MAX (Maximum Speed)
The maximum speed encountered since switch-on or since
the last Maximum Speed Reset. To reset see page 21 S2.
3 SPEED AVG (Average Speed)
The average speed attained since switch-on or since the last
Average Speed Reset. To reset see page 21S3.