User's Manual

2.3 Information Display Operation

Information is displayed in a "Chapter and Page" format using the

button to scroll through the chapters and the and buttons to

move between the pages within a chapter. The diagram below shows

the information format.

Pressing the button at any time moves to the next Chapter and the

page last selected in that Chapter will be displayed. Both Chapter and

Page selection will scroll back to the first page once a cycle has been

completed.

Four chapters are available:

Single line displays

Eight pages, each displaying a single item of data. The data

item to be displayed on each page can be selected in setup

from the full list of data pages described in section 2.8.

See setup on page 25 S28.

Four line displays

Four pages, each displaying four data items. The data items

to be displayed on each page can be selected in setup from

the full list of data pages described in section 2.8.

See setup on page 26 S29

Rolling Road display

A single page displaying the following navigation data:

current waypoint name, distance to waypoint, course over

the ground (COG), speed over the ground (SOG), bearing to

waypoint, cross track error and turn angle.

A rolling road diagram illustrates the vessels course in

relation to the direct track from the previous to the current waypoint and

the direction to steer to return to the direct track.

Graph Displays

Two pages, each displaying a plot of a user selected data

item against time. See setup on page 26 S30.

For the wind direction graph, LFT and HDR labels indicate

the lift and header trend segments of the graph.

To alter the time span of a graph:

Press the button while the graph is displayed. The message

“CHANGE TIME” appears at the top of the page. Use the and

buttons to change the time span. Press again to confirm the

selection.

Remote Display