User's Manual
Table Of Contents
- 1 Notices
- 2 Introduction
- 3 Operation
- 3.1 Display and controls
- 3.2 Turning the transceiver on
- 3.3 Display layout
- 3.4 Main operating screens
- 3.5 Target list
- 3.6 Own vessel and voyage data
- 3.7 Own dynamic data
- 3.8 Received messages
- 3.9 Alarms screen
- 3.10 Target plot screen
- 3.11 Working with AIS text and Safety Related Messages (SRMs)
- 3.12 Handling alarms
- 3.13 Entering text
- 3.14 Long range messages
- 3.15 Passwords and security
- 3.16 The configuration menu
- 3.17 Tanker mode
- 3.18 Units display - speed and distance
- 4 Installation
- Figure 32 Typical AIS transceiver connection
- 4.1 What’s in the box?
- 4.2 Preparing for installation
- 4.3 Installation procedures
- Figure 34 AIS transceiver dimensions
- Figure 35 Mounting the AIS transceiver
- Figure 36 Panel mounting the AIS transceiver
- Figure 37 Junction box dimensions
- Figure 38 Mounting the junction box
- Figure 39 GPS antenna location
- Figure 40 GPS antenna connection
- Figure 41 VHF antenna installation
- Figure 42 VHF antenna connection
- 4.4 Connecting the equipment
- 4.5 Configuring the AIS950 Transceiver
- 4.6 Changing the password
- 4.7 Confirming correct operation
- 4.8 Regional area settings
- 5 Technical Specifications
- 6 Technical reference
- 7 Drawings
- 8 Installation record
Operation
Page 13
Table 1 Status Icons
3.4 Main operating screens
In normal operation the display shows one of six main operating screens. The next screen can be selected at
any time by pressing the ‘Screen’ function key as shown in Figure 4. The following subsections describe each
of the operating screens in more detail.
Figure 4 Selection of main operating screen
Shown when unread AIS safety related text messages are
available.
Shown flashing when an alarm is active, shown constantly
when an alarm is active, but acknowledged.
1W
Shown when the transmitter is set to 1W mode.
Icon Description
Target list Own vessel &
voyage data
Own dynamic
data
AlarmsTarget plot Received
messages