User's Manual
Table Of Contents
- 1 Notices
- 2 Introduction
- 3 Operation
- 3.1 Display and controls
- 3.2 Turning the transceiver on
- 3.3 Display layout
- 3.4 Main operating screens
- 3.5 Target list
- 3.6 Own vessel and voyage data
- 3.7 Own dynamic data
- 3.8 Received messages
- 3.9 Alarms screen
- 3.10 Target plot screen
- 3.11 Working with AIS text and Safety Related Messages (SRMs)
- 3.12 Handling alarms
- 3.13 Entering text
- 3.14 Long range messages
- 3.15 Passwords and security
- 3.16 The configuration menu
- 3.17 Tanker mode
- 3.18 Units display - speed and distance
- 4 Installation
- Figure 32 Typical AIS transceiver connection
- 4.1 What’s in the box?
- 4.2 Preparing for installation
- 4.3 Installation procedures
- Figure 34 AIS transceiver dimensions
- Figure 35 Mounting the AIS transceiver
- Figure 36 Panel mounting the AIS transceiver
- Figure 37 Junction box dimensions
- Figure 38 Mounting the junction box
- Figure 39 GPS antenna location
- Figure 40 GPS antenna connection
- Figure 41 VHF antenna installation
- Figure 42 VHF antenna connection
- 4.4 Connecting the equipment
- 4.5 Configuring the AIS950 Transceiver
- 4.6 Changing the password
- 4.7 Confirming correct operation
- 4.8 Regional area settings
- 5 Technical Specifications
- 6 Technical reference
- 7 Drawings
- 8 Installation record
Installation record
Page 73
8 Installation record
The following installation record should be completed and retained on board the vessel once the AIS
transceiver has been installed and commissioned.
Vessel details
Vessel name
Flag state
IMO number MMSI number
Owner Radio call sign
Type of vessel Gross registered tonnage
Length (m) Beam (m)
AIS transceiver serial number
(see underside of transceiver or packaging
label)
Junction box serial number (see label on junc-
tion box)
Installation password (if changed from default)
Transceiver software version number
UI software version number
GPS / GNSS antenna locations
Internal GPS antenna location (all dimensions in meters, refer to the diagram below)
A= B= C= D=
External GNSS antenna location (all dimensions in meters, refer to the diagram below)
A= B= C= D=
Ref A
Antenna
Ref A + Ref B = Length in metres Ref C + Ref D = Beam in metres
Ref B
Stern Bow
Ref C
Ref D