User's Manual
Table Of Contents
- 1 Notices
- 2 Introduction
- 3 Operation
- 3.1 Display and controls
- 3.2 Turning the transceiver on
- 3.3 Display layout
- 3.4 Main operating screens
- 3.5 Target list
- 3.6 Own vessel and voyage data
- 3.7 Own dynamic data
- 3.8 Received messages
- 3.9 Alarms screen
- 3.10 Target plot screen
- 3.11 Working with AIS text and Safety Related Messages (SRMs)
- 3.12 Handling alarms
- 3.13 Entering text
- 3.14 Long range messages
- 3.15 Passwords and security
- 3.16 The configuration menu
- 3.17 Tanker mode
- 3.18 Units display - speed and distance
- 4 Installation
- Figure 32 Typical AIS transceiver connection
- 4.1 What’s in the box?
- 4.2 Preparing for installation
- 4.3 Installation procedures
- Figure 34 AIS transceiver dimensions
- Figure 35 Mounting the AIS transceiver
- Figure 36 Panel mounting the AIS transceiver
- Figure 37 Junction box dimensions
- Figure 38 Mounting the junction box
- Figure 39 GPS antenna location
- Figure 40 GPS antenna connection
- Figure 41 VHF antenna installation
- Figure 42 VHF antenna connection
- 4.4 Connecting the equipment
- 4.5 Configuring the AIS950 Transceiver
- 4.6 Changing the password
- 4.7 Confirming correct operation
- 4.8 Regional area settings
- 5 Technical Specifications
- 6 Technical reference
- 7 Drawings
- 8 Installation record
Notices
Page 8
1.2.4 Disposal of the transceiver and packaging
Please dispose of this AIS transceiver in accordance with the European WEEE Directive or with the applicable
lo
cal regulations for disposal of electrical equipment. Every effort has been made to ensure the packaging for
the transceiver is recyclable. Please dispose of the packaging in an environmentally friendly manner.
1.2.5 Accuracy of this manual
This manual is intended as a guide to the installation, setup and use of this pr
oduct. Every effort has been made
to ensure the accuracy of this manual, however due to continuous product development this manual may not
be accurate in all respects, therefore no guarantee is offered. If you are in any doubt about any aspect of this
product, please contact your dealer.
1.2.6 Marine Equipment Directive
The AIS950 transceiver complies with international standa
rds and is type approved in
accordance with the
European Marine Equipment Directive. The EU Declaration of Conformity is provided at the rear of this manual
and lists the relevant approval standards.
Notified Body No: 0168
Year: 2012