Installation Instructions Part 1

G-Series Installation & Commissioning 46
Video/Entertainment system cables
The following cables are used to connect the GVM400 video
module:
Video output connection
The video output is obtained from the GPM400 processor using
DVI or VGA cables. See
Monitor connections on page 38 for
details.
Audio output connection
G-Series audio output is obtained from the GPM400. The following
audio signals are obtained through this output.:
• Entertainment / Audio from the Video processor. (Associated
with the Comp4 or S-Video connection)
• Alarms and other system alerts.
Note: The audio output is line level only and must be connected to
a suitable 3rd party amplifier in order to be heard.
Audio cables
The following cables are available to connect to the audio output:
Cable Part No Notes
S-Video
1.5 m (4.9 ft)
adapter cable
R08274 Included with GVM400.
Audio
1.5 m (4.9 ft)
audio cable
R08275 Included with the GVM400
AV cables N/A Installer to supply suitable cables.
Video and audio equipment should be supplied with appropriate cables to
connect to the G-Series system.
SeaTalk
hs
Use SeaTalk
hs
Patch cables.
See page 47
Power Power cables are not included with GVM400.
You must supply appropriate power cables to
suit your system requirements (see page 35).
See
Appendix C for other cables and accessories.
Cable Part No Notes
Audio
3 m (9.8 ft)
Audio out cable
R08266 Supplied with GPM400.
15 m (49.2 ft)
G-Series Audio out
cable
R08298
GPM 400
D10190-1
To ship's audio system