Installation Instructions Part 1

G-Series Installation & Commissioning 48
Increasing network capacity
For increased capacity the network may contain multiple SeaTalk
hs
switches, connected together using SeaTalk
hs
network patch
cables.
DSM digital sounder connection
The G-Series system can be used with the following DSM units:
• DSM300
• DSM400
The DSM connects to G-Series system via the SeaTalk
hs
switch.
Example: DSM400 connection
Maximum quantity of DSM sounders
The G-Series system will support 1 DSM sounder.
See also
For more information refer to the installation guide supplied with the
DSM unit.
1.5 m (4.9 ft)
SeaTalk
hs
patch cable
E06054 Patch cables are used to connect
the following devices to the
SeaTalk
hs
switch:
• GVM400 video module
• SeaTalk
hs
Switch (connecting to
other SeaTalk
hs
switches).
• G-Series marine displays.
5 m (16.4 ft)
SeaTalk
hs
patch cable
E06055
10 m (32.8 ft)
SeaTalk
hs
patch cable
E06056
15 m (49.2 ft)
SeaTalk
hs
patch cable
A62136
20 m (65.6 ft)
SeaTalk
hs
patch cable
E06057
Power Power cables are not included with the SeaTalk
hs
switch. You must supply appropriate power cables to
suit your system requirements (see page 35).
See Appendix C for other cables and accessories.
Cable Notes
D10201-1
HS switch
SeaTalk HS
DSM400