Installation Instructions Part 1

49 Chapter 4: Cables and connections
Digital radar connection
The digital radar scanner connects to the SeaTalk
hs
switch using
dedicated digital radar cables
Maximum quantity of Radar scanners
The G-Series system will support up to 2 digital rader scanners.
Digital radar cables
The following cables are used to connect the digital radar scanner:
See also
For more information refer to the installation guide supplied with the
radar scanner.
4.8 GPS Connection
Depending upon your GPS type it may be either connected via
SeaTalk or NMEA 0183.
For SeaTalk connection refer to:
• SeaTalk & Alarm connection on page 50.
• Separate instructions supplied with your GPS unit.
For NMEA 0183 connection refer to:
•
NMEA 0183 connections on page 51
• Separate instructions supplied with your GPS unit.
Cable Part No Notes
Digital cable
5 m (16.4 ft)
Digital cable
A55076
HS switch
Radar
D10202-1
Power
VCM100
10 m (32.8 ft)
Digital cable
A55077
15 m (49.2 ft)
Digital cable
A55078
25 m (82.0 ft)
Digital cable
A55079
Digital extension cable Required if you wish to extend
the cable distance.
5 m(16.4 ft)
extension cable
A5080
10 m (32.8 ft)
extension cable
A55081
The maximum cable length including all extensions is 55 m (180 ft)
Cable Part No Notes