Installation Instructions Part 1

G-Series Installation & Commissioning 62
Cables
• Minimum bend radius of 100 mm (3.94 in).
See also
Ensure you record your keyboard details on the schematic dia-
gram. See
Appendix B - Nav Station schematic.
Wireless upgrade kit
Allows wireless operation of the keyboard.
Mounting and environment
• The should be within sight of G-series monitors. This will allow a
keyboard to operate the system whilst on charge.
1. Install charge point.
Ensure flat edge is located to
left side for correct orientation
Note: Remove protective cover
from each side of gasket
No.4 x 3/8"screw
Cut 25 mm
diameter hole
25 mm
diameter hole
D10161-1
25 mm
(1 in)
49 mm (2.6 in)