Installation Instructions Part 2

G-Series Installation & Commissioning 76

To open the Set Master GPM menu:

Select Master GPM - menu and soft keys

• GPM-XXXXXXXXX

The available GPMs are listed by serial number. Cross refer

these with the Serial numbers on your Nav Station schematic

diagrams.

• Local GPM

Indicates the GPM to which the monitor is physically connected.

• Current Master

This is the GPM currently set at the master.

To set the Master GPM

1. Select the appropriate GPM from those displayed.

2. Press the SET AS MASTER softkey.

To identify the correct GPM

If you are unsure of which GPM to select, press the

DISCOVER GPM softkey to show a message on every monitor

which identifies the GPM to which it is connected.

D10334-1

SYSTEM SETUP

SYSTEM CONFIGURATION

SET MASTER GPM

SET AS MASTER

D10335-1