Installation Instructions Part 2

G-Series Installation & Commissioning 82

8.1 Language setting

The system will operate in the following languages:

To select a language:

Select the required language from those displayed.

8.2 Compass heading setup

The G-Series system provides options to set up a Raymarine

compass.

Note: If the compass is connected to a Raymarine autopilot, you

should calibrate the compass heading using the autopilot

controller, and proceed to the Radar setup (page 83).

Check heading

Provided that the system has a compass connected, the compass

heading is displayed in the data bar at the top of the screen:

If no heading is displayed this could indicate a problem with the

autopilot or compass connection. See

Chapter 9:

Troubleshooting. Page 91 for more information.

Linearize (swing) the compass

If your system has a Raymarine compass (e.g ST80 or Fasthead-

ing sensor) which is not connected to an autopilot system, then you

will need to linearize (swing) the compass using the G-Series

system.

To linearize your compass:

1. Once you have selected LINEARIZE COMPASS, follow the on-

screen instructions.

2. When instructed to align heading, press the ALIGN HEADING

soft key and then turn the rotary control one click at a time to

fine tune the heading.

English (US) English (UK) Chinese

Danish Dutch Finnish

French German Greek

Icelandic Italian Japanese

Korean Norwegian Portuguese

Russian Spanish Swedish

D10340-1

SYSTEM SETUP

LANGUAGE

D10351-1

Compass Heading

D10349-1

COMPASS SETUP

LINEARIZE COMPASS