Installation Instructions Part 2
G-Series Installation & Commissioning 66
5.5 GVM400 Video Module
Mounting and environment
• Mount below decks in a dry area
• Install on a vertical surface.
• Do NOT mount near sources of heat or vibration. (e.g. engine)
• Install well away from potential sources of ignition.
Cables
• Minimum bend radius of 100 mm (3.94 in).
• Power cable should be fixed to the plastic case using the cable
tie provided.
• All video / data cables must be secured within 150 mm (5.91 in)
of the unit using a suitable cable clip. This will prevent undue
strain on the connectors.
D10197-1
Minimum
radius bend
of cable
(100mm)
Cable clip
170 mm (6.7 in)
237 mm (9.33 in)
56 mm
(2.2 in)