Installation Manual

26
lift and fix the digital radar in place before fixing the antenna. You
should never lift the unit by the attached open array antenna.
Please read and understand chapter 1 before you start to install any
of the components of the digital radar system.
2.2 Installing the VCM 100
CAUTION:
It is important to keep the cable run from the DC distribution
panel/circuit breaker to the VCM100 as short as possible. (see
Table 1-2, p.21).
).
Ensure the VCM100 unit is level on it’s horizontal plane. Once
situated, fit in position with the 2 mounting screws provided
CAUTION:
The VCM100 is a ‘below decks’ piece of equipment. It is
designed to be splash-proof only!
D10496-1
Mounting lug
Keyhole slot
Main cover
Connector
cover
Connector
cover catch
Power in
Power out
Screens