Installation Manual

27
2.3 Securing the pedestal to the mounting platform
1. Using the paper template supplied with the mounting kit, mark the
flat mounting surface in-line with the holes, and drill as indicated on
the template.
2. Ensure the lifting eyes are securely fitted to the top of the pedestal,
and the yellow protective cap is in place.
Preparing mounting holes
D10491-1
Drill 11 mm
diameter hole
(4 positions)
Centre of Rotation
FORWARD
Cable Entry
140 mm
70 mm
150 mm
57 mm
Maximum
outline of
pedestal
IMPORTANT
Secure pedestal
before opening lid
Digital Pedestal
Mounting Template
FORWARD
Mounting platform
1. Tape template to mounting platform.
2. Using template, drill 11 mm diameter hole in four positions.
IMPORTANT
Ensure mounting platform
is adequately robust for
this installation.