Installation Manual

Parking alignment

When the radar is in standby or powered down, the antenna should

park (rest) facing forward, (so you can see the Raymarine logo

when looking towards the scanner from the front of the boat). A

parking offset angle determines where the scanner parks, and you

can set this, so the scanner parks correctly.

To set the correct offset angle ensure that:

• The display is switched on with the radar page selected.

• The radar is powered up.

• The radar is in standby mode.

1. Press MENU.

2. Select Radar Setup.

3. Select Scanner Setup.

4. Select the Parking Offset option, then set the correct offset angle

so the antenna parks facing forward.

5. Select OK until you return to the radar display page.

6. Visually check that the radar is suitably parked.