Installation Manual

1
Important Information
Digital Radar Owners Handbook
June 2007
Intended use
This product is a radar scanner intended for use within a naviga-
tional radar system. The intended application is for leisure marine
boats and work boats not covered by IMO/SOLAS carriage
requirements.
Safety Notices
WARNING: Electrical safety
Ensure you have the power supply switched and locked off
before you start
installing/servicing this product.
WARNING: Navigational safety
Although we have designed this product to be accurate and
reliable, many factors can affect its performance. Therefore, it
should serve only as an aid to navigation and should never
replace commonsense and navigational judgement. Always
maintain a permanent watch so you can respond to situations
as they develop.
CAUTION:
Before installing the Digital radar system, check that individual
components are the correct voltage for your boat’s supply.
As correct performance is critical for safety, we STRONGLY
RECOMMEND that an Authorized Raymarine Service
Representative fits this product. You will only receive full warranty
benefits if you can show that an Authorized Raymarine Service
Representative has installed or commissioned this product.
This radar equipment must be installed, commissioned and
operated in accordance with the Raymarine instructions provided.
Failure to do so could result in personal injury, damage to your boat
and/or poor product performance. In particular
1. High Voltage. The scanner unit contains high voltages. Adjust-
ments require specialized service procedures and tools only avail-