Owner's Handbook

24 Pathfinder Radar Scanners
5. Referring to the following illustration, remove the securing
nut (1) from the watertight gland (2) and grommet (3), where the
inter-unit cable (4) will enter the base.
1 Securing nut 2 Gland 3 Grommet 4 Inter-unit cable 5 Eight-way plug 6 Eight-way socket 7 Power
cores (2 or 4) 8 Terminal clamp 9 Screwdriver 10 Earthing clamp 11 Top clamp 12 Clamp screws
6. Slide the gland nut (1) and grommet (3) onto the inter-unit cable
(4) and insert the cable, still covered by its protective sleeve,
through the gland.
7. Carefully cut and remove the protective sleeve to expose the 8-
way plug (5) and power cores (7). Place the cable in the earthing
clamp (10), ensuring that the exposed wire braid sits in the earth-
ing clamp.
8. Connect the 8-way plug (5) to the connector (6). The correct fit-
ting is with the small arrow marked on the body of the plug facing
upwards and to the left hand side. The grey wire will then be at the
left hand side and the white wire will be at the right hand side.
D3230-5
4
10
11
12
White wire
2
3
1
10
11
12
5
6
7
8
9
4