User's Manual

30 Ray101 Handheld VHF Radio
4.16 USER Channel Mode
Press and hold the HL/USER key while in normal operation mode to enter
User Mode. The USER and SAVED indicators appear.
USER Channel Mode displays only the channels that you have saved to
memory, which enables you to easily use your favorite channels while
bypassing unwanted or seldom-used channels during a scan.
Note: The procedure for saving a channel to memory is outlined in Section
4.14, Adding Channels to Memory.
While in User Mode:
• Press and release the SCAN/SAVE key to start Memory Scan mode.
• Press and hold the SCAN/SAVE key to delete the current channel from
memory list.
• Press 16/9 to terminate User mode and switch to the Priority Channel.
Note: You cannot switch Channel sets while in User Mode. The WX/BAND
key does not function and sounds an error beep if pressed.
Press and hold the HL/USER key for 3 seconds to quit User mode and return
to the last-used working channel.
81229_1.book Page 30 Wednesday, November 12, 2003 2:39 PM