Operating Instructions and Installation Instructions

3.1Introduction
Thissectionofthehandbookdescribeshowtosetupyour
RaymarineSatelliteTVsystemafterinstallationusingtheACUorthe
GraphicalUserInterface(GUI),andincludesthefollowingfunctions:
•Systemstartup•Editingsatelliteinformation
•Changethedefaultsatellite•Settingantennaparameters
•Monitortheantennastatus
•Settingthelocalfrequency
•Entersetupmode
•SettingtheDiSEqCmethod
•Settingyouroperatingregion
•Displayversions
•Settingthedefaultsatellites•Settingantennagoposition
•SettingupRemoteControl•Settingantennamovestep
•SettingtheGPS
Manyoftheabovefunctionswillonlyberequiredatinitialinstallation
ofyoursystem.
Important:Raymarinedoesnotrecommendchangingthe
satelliteinformationunlessadvisedtodosobythesatellite
provider.
Note:ThesatellitenamesshownontheACUscreenare
dependentongeographiclocationandthereforemaybedifferent
tothenamesinthismanual.
Note:Verticalandhorizontalpolarizationappliestoregionswith
linearpolarizationonly
3.2Gettingstarted
Switchingon
EnsureyourIRDsandtelevisionmonitorsareswitchedon.
PressthepowerswitchontheACUtoswitchonthesystem.Check
ontheACUthatthestart-upscreensaredisplayedinthecorrect
sequence.
Startupsequence
INITIALIZE ANT ENNA
RAYMARINE 45 S TV
INITIALIZE ACU
RAYMARINE 45 S TV
Start of communication between antenna and the ACU.
Antenna initialized.
Antenna is searching for Satellite A.
Operating mode - antenna tracking satellite
SEARCH A:
HOTBIRD
SETUP
ASTRA2
B:HOTBIRD
SETUP
TRACKING A:
ASTRA2
B:HOTBIRD
TURKSAT
TRACKING A:
ASTRA2
System set with two
default satellites
System set with three
default satellites
28
STVGen2installationandoperation