User Manual

Chapter 2: Using the Tiller Pilot 23
Exiting WindTrim mode
To exit WindTrim mode:
• press standby to return to Standby mode
• press auto to return to Auto mode
Returning to the previous apparent wind angle
If you have steered the boat away from the selected apparent wind angle (for
example, performing a dodge maneuver or selecting Standby) you can return to
the previous apparent wind angle:
1. Press and hold standby and auto together for 1 second.
2. The display flashes the previous locked heading for 10 seconds.
3. While the display is flashing, press standby and auto together to select the
previous heading:
• when you select the previous heading, the “W” flashes for 10 seconds to
confirm the selection
Wind shift alarm
If changes in apparent wind angle alter the original locked compass heading by
more than 15°, the wind shift alarm will sound.
The display alternates between the current WindTrim heading and the direction of
wind shift.
D360-3
D209-2
81130_7.book Page 23 Friday, December 13, 2013 12:58 PM